No. 3 (2016) | Vestnik of Polotsk State University. Part B. Industry. Applied Sciences

Published: 2016-02-26

pdf (Русский)

IMPROVING REPAIR STRATEGIES AUTOMOBILE UNITS

V. IVANOV

2-7

pdf (rus) (Русский)

PURPOSEFUL EVOLUTION OF SET WAYS TO ROUNDING GEAR SLOTTING OF CYLINDRICAL GEARS

GOLEMBIEVSKI GOLEMBIEVSKI

8-15

pdf (rus) (Русский)

RESISTANCE OF THE CUTTING TOOL IN THE MULTI-DIRECTIONAL TURNING COMPUTER NUMERIC CONTROL

I. KASHTALYAN, B. ORUKARI, L. DUBINA

16-21

pdf (rus) (Русский)

INFLUENCE OF GEOMETRICAL OF PARAMETERS OF AXIAL TOOL TOOTH AT ITS STRESS STATE

M. MIKHAILOV

22-27

pdf (rus) (Русский)

MODELLING OF INFLUENCE OF ROUGHNESS OF THE SPHERICAL SURFACE OF THE PART ON FEED SPEED SELECTION OF THE ROTATING CUTTING TOOL

N. POPOK, I. KUNCEVICH, R. HMELNICKY, V. ANISIMOV

28-37

pdf (rus) (Русский)

SERVICE LIFE PREDICTION FOR MOBILE MACHINE STRUCTURES BY RESULTS OF RANDOM ACCELERATED TESTS

A. RAKITSKY

38-43

pdf (rus) (Русский)

JUSTIFICATION FOR USE TRAPEZOIDAL BLADES ON ROTARY MOWERS

E. MAZHUGIN, S. RUBEC, A. PASHKEVICH

44-50

pdf (rus) (Русский)

RESULTS PRODUCTION TEST CHIPPER KNIVES, MANUFACTURED ACCORDING TO THE DEVELOPED TECHNOLOGY

A. ALIFANOV, V. TSURAN, A. MILUKOVA

51-55

pdf (rus) (Русский)

PERFECTION OF DESIGN PLASMAGENERATOR FOR PLASMA CHEMICAL DRAWING OF THIN-FILM COVERINGS

A. GOLOZUBOV

56-60

pdf (rus) (Русский)

GRINDING OF MATERIALS IN THE BALL MILL WITH THE MIXER OF CONTINUOUSLY WORKING

V. KOZLOVSKY, P. VAJTEHOVICH

61-65

pdf (rus) (Русский)

MODELING OF THE PROCESS OF INDUCTION WELDING POWDER SURFACES CONTAINING NANODIMENTIONAL MODIFIERS

M. BELOTSERKOVSKY, I. SOSNOVSKY, A. KURILYONOK, O. KUZNECHIK

66-74

pdf (rus) (Русский)

ON THE STRENGTH OF THE COMPOUNDS, PREPARED BY PROJECTION WELDING WITHOUT FORMING A MOLTEN CORE

A. POLYAKOV, S. FURMANOV, T. BENDIK, А. STEPANOV, M. KOLOBOVA

75-81

pdf (rus) (Русский)

RESTORATION OF TREES DIESEL-GENERATORS ELECTROCONTACT SINTERING DISCRETE COATING

Y. VOLKOV, V. LOPATA, T. VIGERINA, M. AGEEV

82-88

pdf (rus) (Русский)

THERMOBARIC SINTERING OF DIAMOND MICROPOWDERS MODIFIED BY SILICON AND TITANIUM

V. SENYUT, V. ZHORNIK, A. PARNITSKY, E. MOSUNOV, A. DUDAN

89-93

pdf (rus) (Русский)

THE INFLUENCE OF TECHNOLOGICAL PARAMETERS OF SPUTTERING AND ION NITRIDING ON MICROSTRUCTURE AND WEAR RESISTANCE OF GAS-THERMAL COATING OF HIGH CHROMIUM STEEL 95X18

A. GRIGORCHIK, V. KUKAREKO, M. BELOTSERKOVSKY, A. BELY

94-99

pdf (rus) (Русский)

RADIOABSORBING PROPERTIES OF NICKELED POWDERED PERLITE

O. BOIPRAV, T. BORBOTKO, L. LYNKOU

100-106

pdf (rus) (Русский)

TO THE ISSUE OF FORMATION OF STRUCTURE AND HARDNESS OF SEMIHEAT-RESISTANT STEEL X165CrMoV12 BY HEAT-TREATMENT AND CHEMICAL HEAT-TREATMENT

I. STEPANKIN, E. POZDNYAKOV, E. ASTAPOV

107-114

pdf (rus) (Русский)

STRUCTURAL AND PHASE TRANSFORMATIONS AND MODIFYING IN ELECTROCONTACT TREATMENT GAS-THERMALOF STEEL COATING

M. CHERNOVOL, T. VORONA, O. SHTEMPEL, L. LOPATA

115-122

pdf (rus) (Русский)

FORMATION OF COMPOSITE POWDERS OF SYSTEMS Fe–SiC AND Fe–B4C BY MECHANICAL SYNTHESIS

V. ZHORNIK, S. KOVALIOVA, N. KHOMICH, T. GRIGORIEVA, A. DUDAN, S. GRIGORIEV

123-129

pdf (rus) (Русский)

ASSESSMENT OF ALLOWED HEATING TEMPERATURES OF CYLINDRICAL PARTS DURING DEPOSITION OF THE METAL COATING BY HYPERSONIC METALLIZATION USING MAF GAS

M. BELOTSERKOVSKY, A. SOSNOVSKY, D. TRUSSOV, A. YALOVIK

130-135

pdf (rus) (Русский)

RESEARCH OF OPTICAL CHARACTERISTICS OF COMPOSITE MATERIALS INCLUDING WATER SOLUTIONS

I. GRABAR, N. NASONOVA, Т. PULKO, L. LYNKOU

136-140

pdf (rus) (Русский)

MODIFIED METHOD FOR DETERMINING THE NUMBER OF COMPONENTS IN SOLUTION

M. ZILBERGLEIT, О. SHEVCHUK, V. FLEISHER, S. YAKUBOVSKIY

141-146

pdf (rus) (Русский)

THE EFFECT OF THE COMPOSITION OF THE MIXED SOLVENT N-MP–TEG–WATER ON THE QUALITY OF THE EXTRACT AND RAFFINATE DURING THE EXTRACTION OF AROMATIC HYDROCARBONS FROM REFORMATE

S. POKROVSKAYA, V. KUDRYAVTSEV

147-152

pdf (rus) (Русский)

THE PECULIARITIES OF STRUCTURE AND PROPERTIES OF ROAD BITUMEN, OBTAINED BY VARIOUS TECHNOLOGIES

N. SUKHOVILO, S. TKACHYOV

153-159

pdf (rus) (Русский)

COMPARATIVE EVALUATION OF THE SOLVATING POWER OF HYDROCARBONS AND ALCOHOLS TOWARDS NAPHTHALENE

S. YAKUBOUSKI, YU. BULAUKA, YA. KAZAK

160-163

pdf (rus) (Русский)

THE COLORIMETRIC METHOD FOR CONTROL OF CONCENTRATION OF ALCOHOL-SOLUBLE DYES

M. ZILBERGLEIT, O. MAEVSKAYA

164-167

pdf (rus) (Русский)

JUSTIFICATION OF TECHNICAL SOLUTIONS RELATED TO OCCUPATIONAL SAFETY AND THE ENVIRONMENT

V. IVANOV, V. DRONCHENKO

168-172

pdf (rus) (Русский)

COMPARATIVE ANALYSIS OF THE RESULTS OF MODELING CONSEQUENCES OF ACCIDENTS AT DANGEROUS PRODUCTION FACILITIES REFINING INDUSTRY USING THE SOFTWARE, TOXI+ RISK

S. POKROVSKAYA, YU. BULAUKA, D. GALKINA

173-178

pdf (rus) (Русский)

THE PREDICTED INJURY RISK AT MAINTENANCE OF FORAGE HARVESTERS

А. MISUN

179-184

pdf (rus) (Русский)

REDUCTION OF EMISSIONS OF NITROGEN OXIDES WHILE WORKING IN BOILER PLANTS

V. SEMENOV, V. DRONCHENKO

185-189

pdf (rus) (Русский)

DESIGN AND CALCULATION OF EFFECTIVE JET DEVICES SYSTEM “LIQUID – GAS”

E. SAFRONOVA, A. SPIRIDONOV, A. MITINOV

190-194

pdf (rus) (Русский)

КАК НАПИСАТЬ НАУЧНУЮ СТАТЬЮ (структура материала и организация работы)

V. IVANOV

195-199

pdf (rus) (Русский)

Full Issue

Machine-building and theoretical engineering

IMPROVING REPAIR STRATEGIES AUTOMOBILE UNITS

PURPOSEFUL EVOLUTION OF SET WAYS TO ROUNDING GEAR SLOTTING OF CYLINDRICAL GEARS

RESISTANCE OF THE CUTTING TOOL IN THE MULTI-DIRECTIONAL TURNING COMPUTER NUMERIC CONTROL

INFLUENCE OF GEOMETRICAL OF PARAMETERS OF AXIAL TOOL TOOTH AT ITS STRESS STATE

MODELLING OF INFLUENCE OF ROUGHNESS OF THE SPHERICAL SURFACE OF THE PART ON FEED SPEED SELECTION OF THE ROTATING CUTTING TOOL

SERVICE LIFE PREDICTION FOR MOBILE MACHINE STRUCTURES BY RESULTS OF RANDOM ACCELERATED TESTS

JUSTIFICATION FOR USE TRAPEZOIDAL BLADES ON ROTARY MOWERS

RESULTS PRODUCTION TEST CHIPPER KNIVES, MANUFACTURED ACCORDING TO THE DEVELOPED TECHNOLOGY

PERFECTION OF DESIGN PLASMAGENERATOR FOR PLASMA CHEMICAL DRAWING OF THIN-FILM COVERINGS

GRINDING OF MATERIALS IN THE BALL MILL WITH THE MIXER OF CONTINUOUSLY WORKING

Материаловедение и металлургия

MODELING OF THE PROCESS OF INDUCTION WELDING POWDER SURFACES CONTAINING NANODIMENTIONAL MODIFIERS

ON THE STRENGTH OF THE COMPOUNDS, PREPARED BY PROJECTION WELDING WITHOUT FORMING A MOLTEN CORE

RESTORATION OF TREES DIESEL-GENERATORS ELECTROCONTACT SINTERING DISCRETE COATING

THERMOBARIC SINTERING OF DIAMOND MICROPOWDERS MODIFIED BY SILICON AND TITANIUM

THE INFLUENCE OF TECHNOLOGICAL PARAMETERS OF SPUTTERING AND ION NITRIDING ON MICROSTRUCTURE AND WEAR RESISTANCE OF GAS-THERMAL COATING OF HIGH CHROMIUM STEEL 95X18

RADIOABSORBING PROPERTIES OF NICKELED POWDERED PERLITE

TO THE ISSUE OF FORMATION OF STRUCTURE AND HARDNESS OF SEMIHEAT-RESISTANT STEEL X165CrMoV12 BY HEAT-TREATMENT AND CHEMICAL HEAT-TREATMENT

STRUCTURAL AND PHASE TRANSFORMATIONS AND MODIFYING IN ELECTROCONTACT TREATMENT GAS-THERMALOF STEEL COATING

FORMATION OF COMPOSITE POWDERS OF SYSTEMS Fe–SiC AND Fe–B4C BY MECHANICAL SYNTHESIS

ASSESSMENT OF ALLOWED HEATING TEMPERATURES OF CYLINDRICAL PARTS DURING DEPOSITION OF THE METAL COATING BY HYPERSONIC METALLIZATION USING MAF GAS

RESEARCH OF OPTICAL CHARACTERISTICS OF COMPOSITE MATERIALS INCLUDING WATER SOLUTIONS

Химические технологии и охрана труда

MODIFIED METHOD FOR DETERMINING THE NUMBER OF COMPONENTS IN SOLUTION

THE EFFECT OF THE COMPOSITION OF THE MIXED SOLVENT N-MP–TEG–WATER ON THE QUALITY OF THE EXTRACT AND RAFFINATE DURING THE EXTRACTION OF AROMATIC HYDROCARBONS FROM REFORMATE

THE PECULIARITIES OF STRUCTURE AND PROPERTIES OF ROAD BITUMEN, OBTAINED BY VARIOUS TECHNOLOGIES

COMPARATIVE EVALUATION OF THE SOLVATING POWER OF HYDROCARBONS AND ALCOHOLS TOWARDS NAPHTHALENE

THE COLORIMETRIC METHOD FOR CONTROL OF CONCENTRATION OF ALCOHOL-SOLUBLE DYES

JUSTIFICATION OF TECHNICAL SOLUTIONS RELATED TO OCCUPATIONAL SAFETY AND THE ENVIRONMENT

COMPARATIVE ANALYSIS OF THE RESULTS OF MODELING CONSEQUENCES OF ACCIDENTS AT DANGEROUS PRODUCTION FACILITIES REFINING INDUSTRY USING THE SOFTWARE, TOXI+ RISK

THE PREDICTED INJURY RISK AT MAINTENANCE OF FORAGE HARVESTERS

REDUCTION OF EMISSIONS OF NITROGEN OXIDES WHILE WORKING IN BOILER PLANTS

DESIGN AND CALCULATION OF EFFECTIVE JET DEVICES SYSTEM “LIQUID – GAS”

Information

КАК НАПИСАТЬ НАУЧНУЮ СТАТЬЮ (структура материала и организация работы)