No. 8 (2016) | Vestnik of Polotsk State University. Part F. Constructions. Applied Sciences

Published: 2016-07-01

pdf (Русский)

TRADITION AND MODERN TRENDS IN THE SACRALIZATION OF SOCIAL MEMORY IN MONUMENTAL ART AND ARCHITECTURE OF BELARUS

T. GABRUS

2-11

pdf (rus) (Русский)

THE DEVELOPMENT OF ARCHITECTURE IN INSTITUTIONS OF ADDITIONAL EDUCATION OF CHILDREN IN BELARUS

Е. KNIGA

12-17

pdf (rus) (Русский)

THE MAIN ISSUES AND TRENDS SHAPING THE STUDENT HOUSING SPACE-PLANNING DECISION OF THE STUDENT HOSTELS OF POLATSK STATE UNIVERSITY

A. BOROVKOVA

18-23

pdf (rus) (Русский)

QUESTION OF ENERGY FENCING STRUCTURES LOW-RISE BUILDINGS

D. SAFONCHYK

24-27

pdf (rus) (Русский)

WALL MATERIALS ON THE BASIS OF STRAW AND FLAX BOON WITH HIGH HEAT-INSULATING PROPERTIES

A. BAKATOVICH, N. DAVYDENKO, A. DOLZHONOK

28-32

pdf (rus) (Русский)

ELEMENTS OF FORECASTING OF THE CORROSION CONDITION OF THE IRON FITTINGS OF FERRO-CONCRETE

V. BABITSKI, S. KOVSHAR

33-37

pdf (rus) (Русский)

RESEARCH OF MATERIALS FIX MINE TRUNKS

А. KOLOGRIVKO, D. IGOLKA, E. LUKSHA

38-42

pdf (rus) (Русский)

ESTIMATING DEFORMATIONS IN THE COURSE OF WELDING OF AUSTENITIC STEEL

F. PANTELEENKO, A. SHUMAV, A. HEIDARI MONFARED

43-46

pdf (rus) (Русский)

TO THE QUESTION OBTAINED WITHOUT PORE OF THE SURFACE OF PLATE CONCRETE PRODUCTS MOLDEDBY TYPE TECHNOLOGY

E. RAZUEVA, V. BOZYLEV, PARFENOVA PARFENOVA

47-52

pdf (rus) (Русский)

CHANGING THE PHYSICAL AND MECHANICAL PROPERTIES OF CONCRETE MODIFICATIONS IN THEIR STONE PROCESSING WASTE AND TECHNICAL FIBERS

D. BURBA, D. SAFONCHYK

53-56

pdf (rus) (Русский)

MODES AND METHODS FOR ACTIVATION ASH WASTE THERMAL POWER PLANTS

L. PARFENOVA, V. BOZYLEV, A. SHVEDOV, M. VYSOTSKAYA

57-60

pdf (rus) (Русский)

PERSPECTIVE OF APPLICATION FIBER REINFORCED POLYMER WITH AN ACCLIVOUS BEND IN ZONE CUT BENDING CONCRETE ELEMENTS

А. HIL, Е. Д. ЛАЗОВСКИЙ

61-65

pdf (rus) (Русский)

UNCERTAINTY OF THE DESIGN RESISTANCE MODELS OF STEEL STRUCTURES

V. NADOLSKI

66-72

pdf (rus) (Русский)

APPLICATION OF THE DEFORMATION METHOD OF CALCULATION OF DURABILITY OF NORMAL SECTIONS TO THE LONGITUDINAL AXIS OF SECTIONS OF COMPRESSED STONE ELEMENTS

D. HLUKHAU, A. KHATKEVICH

73-78

pdf (rus) (Русский)

EXPERIMENTAL RESEARCH DEFORMABILITY BOND WITH CONCRETE FIBERGLASS PLASTIC ARMATURE OF THE REPUBLIC OF BELARUS

SADIN ЕBRAHIM YAGHOUB, A. KHATSKO

79-84

pdf (rus) (Русский)

THE TEST SETUP FOR INVESTIGATING THE STABILITY OF THE SHEAR PLATES

A. IVANOV, V. ATRAKHIMOVICH

85-88

pdf (rus) (Русский)

ENERGY SAVING INNOVATIVE TECHNOLOGY HEAT GAS AIR SUPPLY OF RESIDENTIAL BUILDINGS AND USE OF RENEWABLE SECONDARY AND NATURAL RESOURCES PLANNING

V. LIPKO, О. SHIROKOVA

89-95

pdf (rus) (Русский)

THE WORKING OUT METHODS OF ELIMINATION PIPELINES BY DIRECTED DRILLING

A. KULBEI, D. KISIALIOY

96-101

pdf (rus) (Русский)

STANDARD TECHNICAL BASE WHILE CONDUCTING REFINING WORKS OF MAIN PIPELINES FROM OIL LEFTOVERS

L. SPIRIDENOK, V. KAZMIRKIVSKI

102-108

pdf (rus) (Русский)

PREDICTION TIME FIGHTING TANKS WHEN APPLYING THE SUBSURFACE METHOD

S. MALASHENKO, O. SMILOVENKO

109-113

pdf (rus) (Русский)

THE METHODS OF NORMATIVE DEPTH OCCURRENCE RECONSTRUCTION OF TRUNK PIPELINES ANALYSIS

L. SPIRIDENOK, D. KISELYOV, A. GRINEVICH

114-118

pdf (rus) (Русский)

THE CALCULATION OF MUTUAL INFORMATION BETWEEN OBJECTS FOR THE INTERPRETATION OF MULTIBAND IMAGES IN ITS MAXIMUM

А. YARMOLENKO, О. KUTSAEVA

119-128

pdf (rus) (Русский)

AEROPHOTOGRAPHY SCALE SELECTION FOR QUALITATIVE DECODING OF DIFFERENT SHAPES OBJECTS

A. MIKHEEVA

129-132

pdf (rus) (Русский)

SUBSTANTIATION OF THE PARAMETERS OF MUTUAL LOCATION OF THE INSTRUMENTS AT THE STATION OF DETERMINE OF CONSTANT CORRECTION OF ELECTRONIC RANGEFINDER

S. KRYACHOK, I. BOHANOV, L. MAMONTOVA

133-138

pdf (rus) (Русский)

ANALYSIS OF OBTAINING NORMAL HEIGHTS POINTS OF THE EARTH’S SURFACE USING DATA FROM SATELLITE MEASUREMENTS AND MODELS OF THE GEOID

K. MARKOVICH, M. MAKAROVA

139-142

pdf (rus) (Русский)

INFLUENCE OF THE GEOMETRY LOCATION OF THE COMMON POINTS ON THE RESULTS OF TRANSFORMATION

A. IVASHNIOVA

143-147

pdf (rus) (Русский)

PHYSICAL AND MECHANICAL PROPERTIES OF NEW MATERIALS RECEIVED FROM CLAY-CONTAINING WASTE POTASH PRODUCTION

E. LAYEUSKAYA, E. VOROBIEVA, D. CHEREDNICHENKO, P. VOROBIEV, A. KOLOGRIVKO

148-155

pdf (rus) (Русский)

AN ASSESSMENT OF CHANGE OF GRAVITY ACCELERATION, THE CAUSED OF FLUCTUATIONS OF LEVEL SURFACES AS A RESULT OF FILLING OF POLOTSK HYDROELECTRIC POWER STATION RESERVOIR

K. MARKOVICH

156-159

pdf (rus) (Русский)

PROTECTION OF THE ENVIRONMENT FROM THE EXHAUST OF AQUEOUS SOLUTIONS OF TECHNICAL DETERGENTS

V. IVANOV, V. DRONCHENKO

160-165

pdf (rus) (Русский)

Full Issue

История архитектуры и градостроительство

TRADITION AND MODERN TRENDS IN THE SACRALIZATION OF SOCIAL MEMORY IN MONUMENTAL ART AND ARCHITECTURE OF BELARUS

THE DEVELOPMENT OF ARCHITECTURE IN INSTITUTIONS OF ADDITIONAL EDUCATION OF CHILDREN IN BELARUS

THE MAIN ISSUES AND TRENDS SHAPING THE STUDENT HOUSING SPACE-PLANNING DECISION OF THE STUDENT HOSTELS OF POLATSK STATE UNIVERSITY

Construction materials

QUESTION OF ENERGY FENCING STRUCTURES LOW-RISE BUILDINGS

WALL MATERIALS ON THE BASIS OF STRAW AND FLAX BOON WITH HIGH HEAT-INSULATING PROPERTIES

ELEMENTS OF FORECASTING OF THE CORROSION CONDITION OF THE IRON FITTINGS OF FERRO-CONCRETE

RESEARCH OF MATERIALS FIX MINE TRUNKS

ESTIMATING DEFORMATIONS IN THE COURSE OF WELDING OF AUSTENITIC STEEL

TO THE QUESTION OBTAINED WITHOUT PORE OF THE SURFACE OF PLATE CONCRETE PRODUCTS MOLDEDBY TYPE TECHNOLOGY

CHANGING THE PHYSICAL AND MECHANICAL PROPERTIES OF CONCRETE MODIFICATIONS IN THEIR STONE PROCESSING WASTE AND TECHNICAL FIBERS

MODES AND METHODS FOR ACTIVATION ASH WASTE THERMAL POWER PLANTS

Строительные конструкции

PERSPECTIVE OF APPLICATION FIBER REINFORCED POLYMER WITH AN ACCLIVOUS BEND IN ZONE CUT BENDING CONCRETE ELEMENTS

UNCERTAINTY OF THE DESIGN RESISTANCE MODELS OF STEEL STRUCTURES

APPLICATION OF THE DEFORMATION METHOD OF CALCULATION OF DURABILITY OF NORMAL SECTIONS TO THE LONGITUDINAL AXIS OF SECTIONS OF COMPRESSED STONE ELEMENTS

EXPERIMENTAL RESEARCH DEFORMABILITY BOND WITH CONCRETE FIBERGLASS PLASTIC ARMATURE OF THE REPUBLIC OF BELARUS

THE TEST SETUP FOR INVESTIGATING THE STABILITY OF THE SHEAR PLATES

Инженерные сети

ENERGY SAVING INNOVATIVE TECHNOLOGY HEAT GAS AIR SUPPLY OF RESIDENTIAL BUILDINGS AND USE OF RENEWABLE SECONDARY AND NATURAL RESOURCES PLANNING

THE WORKING OUT METHODS OF ELIMINATION PIPELINES BY DIRECTED DRILLING

STANDARD TECHNICAL BASE WHILE CONDUCTING REFINING WORKS OF MAIN PIPELINES FROM OIL LEFTOVERS

PREDICTION TIME FIGHTING TANKS WHEN APPLYING THE SUBSURFACE METHOD

THE METHODS OF NORMATIVE DEPTH OCCURRENCE RECONSTRUCTION OF TRUNK PIPELINES ANALYSIS

Геодезия и геоэкология

THE CALCULATION OF MUTUAL INFORMATION BETWEEN OBJECTS FOR THE INTERPRETATION OF MULTIBAND IMAGES IN ITS MAXIMUM

AEROPHOTOGRAPHY SCALE SELECTION FOR QUALITATIVE DECODING OF DIFFERENT SHAPES OBJECTS

SUBSTANTIATION OF THE PARAMETERS OF MUTUAL LOCATION OF THE INSTRUMENTS AT THE STATION OF DETERMINE OF CONSTANT CORRECTION OF ELECTRONIC RANGEFINDER

ANALYSIS OF OBTAINING NORMAL HEIGHTS POINTS OF THE EARTH’S SURFACE USING DATA FROM SATELLITE MEASUREMENTS AND MODELS OF THE GEOID

INFLUENCE OF THE GEOMETRY LOCATION OF THE COMMON POINTS ON THE RESULTS OF TRANSFORMATION

PHYSICAL AND MECHANICAL PROPERTIES OF NEW MATERIALS RECEIVED FROM CLAY-CONTAINING WASTE POTASH PRODUCTION

AN ASSESSMENT OF CHANGE OF GRAVITY ACCELERATION, THE CAUSED OF FLUCTUATIONS OF LEVEL SURFACES AS A RESULT OF FILLING OF POLOTSK HYDROELECTRIC POWER STATION RESERVOIR

PROTECTION OF THE ENVIRONMENT FROM THE EXHAUST OF AQUEOUS SOLUTIONS OF TECHNICAL DETERGENTS